Sit And Stand Workstation Control Box belongs to 1-motor control box with internal power supply. It features small size, full voltage and high power. With self-developed technology of intelligent motion control, Changxing JS control box factory produces control boxes and hand controls.
Basic property of Control Box
Comparison of three generations of control boxes made by JS Technology
products | 1st generation | 2nd generation | 3rd generation |
Anti-pinch method | Current/torsion sensor | Current + patented sensor | Current + patented sensor |
Bluetooth | Support | Support | Support |
Multi-machine parallel | not support | Support up to 16 | not support |
EMC | Pass | Pass | Pass |
modify parameters on PC | Support | Support | Support |
protection | Motor open circuit, Hall fault, motor short circuit, low voltage, illegal power-off, illegal plugging and unplugging, anti-pinch | Motor open circuit, Hall fault, motor short circuit, low voltage, illegal power-off, illegal plugging and unplugging, desktop tilt angle being too large, top and bottom anti-pinch | Motor open circuit, Hall fault, motor short circuit, low voltage, illegal power-off, illegal plugging and unplugging, desktop tilt angle being too large, top and bottom anti-pinch |
Certificates: CE-EMC, CE-LVD, UL, FCC, SAA, RCM, etc.
Types of standing desk control box:
Jingshi has independently developed the fully automatic test system of Sit And Stand Workstation Control Box. It can evaluate the power supply and control parts of the control board comprehensively. The following contents can be detected :
1. If the output of the power supply is standard.
2.If the hardware sensors of each part of the control board are standard.
3. If there is anything wrong with the main power supply, such as with load, overload, over temperature, and short circuit
4. The control board can initialize desk legs, adjusting the desk upward and downward, etc.The system can quickly alarm through the buzzer, upon it detects any anomaly in the process of the automatic test.
Applications
Photos of factory:
FAQ
1. Who are your clients?
We specialize in manufacturing control boxes as well as hand controls. In terms of new clients, once we receive the electric lifting columns, we can measure the parameter and check the property of it. Only then can we program the control box and offer the samples effective for you. We serve companies and factories whose products need drive.
2. How many agents or wholesalers does the company currently have overseas?
Some areas can be opened, welcome to join us.
If you have any questions about Sit And Stand Workstation Control Box, don’t hesitate to contact us.
