product description of Small Height Adjustable Desk Control Box
· This control box belongs to 1-motor control box with external power supply. It features small size, full voltage and high power. It needs to work with an adapter to connect to mains.
· Equipped with a bounce back function to ensure the safe operation of the lift table
· With slow start and slow stop functions
Functions of Control box
1. Using MOS conductor scheme with gyroscope
2. With reverse brake function, it does not drop under the weight of 150KG
3. 5KG high-precision collision protection, no malfunction
4. Protection to keep left and right level, preventing things on desk from falling
5. When No-load, it can run continuously for 20 minutes without protection
Number of control columns: 1-2
Shell: ABS material
Installation method: can be fixed on the desktop board by screws
Overload protection: avoid overload operation by limiting the current to a specific value
Overheating protection, motor open circuit, Hall fault, motor short circuit, low voltage, illegal power failure, illegal plugging and unplugging, excessive desktop tilt angle, anti-pinch upward and downward
Product parameters of Small Height Adjustable Desk Control Box
Duty cycle: continuous work for up to 2 minutes within 20 minutes
Use environment: indoor
Types of standing desk control box we produce
using adapter VS using battery bank
Lifting table, massage chair, massage sofa, electric medical bed, electric leisure bed, smart home, voice recognition.
Unknown application areas:
The linear drive system can be customized and developed according to customer requirements.
Product testing of Small Height Adjustable Desk Control Box
The test adopts the fully automatic test system independently developed by Jingshi, and the test tool can make a comprehensive evaluation of the power supply and control part of the control board. The test system can detect the following contents of the control board:
1. Whether each output of the power supply is normal
2. Whether there are any problems of the main power supply, with load, overload, over temperature, and short circuit
3. Whether the hardware sensors of each part of the control board are normal
4. The control board can be initialized with table legs, moving them up and down, etc.
When there is any anomaly during the automatic test, the system can promptly ring through the buzzer as quickly as possible.
Photos of Jingshi Technology company
If you have any questions about Small Height Adjustable Desk Control Box, don’t hesitate to contact us.