Basic property of Lift Desk Control Box
Maximum power: 150W
Standby power consumption: <0.3W
Duty cycle: 2min ON/18min OFF
Product scheme: MOS conductor
Certificates: CE-EMC, CE-LVD, UL, FCC, SAA, RCM, etc.
1. Using MOS conductor scheme with gyroscope
2. With reverse brake function, it does not drop under the weight of 200KG
3. 5KG high-precision collision protection, no malfunction
4. Protection to keep left and right level, preventing things on desk from falling
5. When No-load, it can run continuously for 20 minutes without protection
This touch-type hand control, holding an advantage of 6 buttons, able to memorize 3 different heights. So it’s convenient to adjust the desk to meet your various needs. And the 6 keys are displayed in 2 rows with the screen on the left side. Whenever pressing button S and a button marked number, the memory will be refreshed.
Types of standing desk control box:
The test of U Lift Desk Control Box adopts the fully automatic test system independently developed by Jingshi, and the test tool can make a comprehensive evaluation of the power supply and control part of the control board. The test system can detect the following contents of the control board:
1. Whether each output of the power supply is normal
2. Whether there are any problems of the main power supply, with load, overload, over temperature, and short circuit
3. Whether the hardware sensors of each part of the control board are normal
4. The control board can be initialized with table legs, moving them up and down, etc.
When there is any anomaly during the automatic test, the system can promptly ring through the buzzer as quickly as possible.
Can you give me some idea about Writing sequence?
1, Sequence can be downloaded only once, except advanced software
2, Downloaded sequence is automatically emptied
3, Parameters are directly inputted
4, All serial numbers record then writing time
5, Scan the serial number then download it directly
Don’t hesitate to contact us if you have any questions about U Lift Desk Control Box.